Recovery of Vibrio cholerae polarized cellular organization after exit from a non-proliferating spheroplast state.

Vibrio cholerae, the causative agent of cholera epidemics, is a rod-shaped bacterium with a highly polarized cellular organization. It can survive harmful growth conditions by entering a non-proliferating spheroplast state, which involves loss of the cell envelope and polarity. How polarized rod organization cells are formed when the spheroplasts exit the non-proliferating state remains largely uncharacterized. To address this question, we investigated how L-arabinose-induced V. cholerae spheroplasts return to growth. We found that de novo morphogenesis started with the elimination of an excess of periplasm, which was immediately followed by cell elongation and the formation of cell branches with a diameter similar to that of normal V. cholerae cells. Periplasm elimination was driven by bifunctional peptidoglycan synthases involved in cell-wall maintenance, the aPBPs. Elongation and branching relied on the MreB-associated monofunctional peptidoglycan synthase PBP2. The cell division monofunctional peptidoglycan synthase FtsI was not involved in any of these processes. However, the FtsK cell division protein specifically targeted the sites of vesicle extrusion. Genetic material was amplified by synchronous waves of DNA replication as periplasmic elimination began. The HubP polarity factor targeted the tip of the branches as they began to form. However, HubP-mediated polarization was not involved in the efficiency of the recovery process. Finally, our results suggest that the positioning of HubP and the activities of the replication terminus organizer of the two V. cholerae chromosomes, MatP, are independent of cell division. Taken together, these results confirm the interest of L-arabinose-induced V. cholerae spheroplasts to study how cell shape is generated and shed light on the de novo establishment of the intracellular organization and cell polarization in V. cholerae.

A real-time analysis of protein transport via the twin arginine translocation pathway in response to different components of the protonmotive force.

The twin arginine translocation (Tat) pathway transports folded protein across the cytoplasmic membrane in bacteria, archaea, and across the thylakoid membrane in plants as well as the inner membrane in some mitochondria. In plant chloroplasts, the Tat pathway utilizes the protonmotive force (PMF) to drive protein translocation. However, in bacteria, it has been shown that Tat transport depends only on the transmembrane electrical potential (Δψ) component of PMF in vitro. To investigate the comprehensive PMF requirement in Escherichia coli, we have developed the first real-time assay to monitor Tat transport utilizing the NanoLuc Binary Technology in E. coli spheroplasts. This luminescence assay allows for continuous monitoring of Tat transport with high-resolution, making it possible to observe subtle changes in transport in response to different treatments. By applying the NanoLuc assay, we report that, under acidic conditions (pH = 6.3), ΔpH, in addition to Δψ, contributes energetically to Tat transport in vivo in E. coli spheroplasts. These results provide novel insight into the mechanism of energy utilization by the Tat pathway.

Spheroplasts preparation boosts the catalytic potential of a squalene-hopene cyclase.

Squalene-hopene cyclases are a highly valuable and attractive class of membrane-bound enzymes as sustainable biotechnological tools to produce aromas and bioactive compounds at industrial scale. However, their application as whole-cell biocatalysts suffer from the outer cell membrane acting as a diffusion barrier for the highly hydrophobic substrate/product, while the use of purified enzymes leads to dramatic loss of stability. Here we present an unexplored strategy for biocatalysis: the application of squalene-hopene-cyclase spheroplasts. By removing the outer cell membrane, we produce stable and substrate-accessible biocatalysts. These spheroplasts exhibit up to 100-fold higher activity than their whole-cell counterparts for the biotransformations of squalene, geranyl acetone, farnesol, and farnesyl acetone. Their catalytic ability is also higher than the purified enzyme for all high molecular weight terpenes. In addition, we introduce a concept for the carrier-free immobilization of spheroplasts via crosslinking, crosslinked spheroplasts. The crosslinked spheroplasts maintain the same catalytic activity of the spheroplasts, offering additional advantages such as recycling and reuse. These timely solutions contribute not only to harness the catalytic potential of the squalene-hopene cyclases, but also to make biocatalytic processes even greener and more cost-efficient.

Preparation of Yeast Cells for Staining.

Staining yeast cells for the presence and location of antigens is particularly challenging. They are small, making the resolution of any antigen difficult; they have a thick cell wall that antibodies cannot penetrate and that is difficult to remove; and they grow in suspension, making handling difficult. In addition, background problems can be especially severe, particularly with polyclonal antibodies, because many antisera contain antibodies to yeast cell wall components. In this protocol, yeast cells are treated with paraformaldehyde, the cell wall is removed by enzymic digestion, and the spheroplasts are attached to poly-l-lysine-coated slides. After cell lysis, the cells are ready to be stained as per normal. Except in unusual circumstances, the detection reagent should be fluorochrome-labeled.

Rescue of Infectious Sindbis Virus by Yeast Spheroplast-Mammalian Cell Fusion.

Sindbis virus (SINV), a positive-sense single stranded RNA virus that causes mild symptoms in humans, is transmitted by mosquito bites. SINV reverse genetics have many implications, not only in understanding alphavirus transmission, replication cycle, and virus-host interactions, but also in biotechnology and biomedical applications. The rescue of SINV infectious particles is usually achieved by transfecting susceptible cells (BHK-21) with SINV-infectious mRNA genomes generated from cDNA constructed via in vitro translation (IVT). That procedure is time consuming, costly, and relies heavily on reagent quality. Here, we constructed a novel infectious SINV cDNA construct that expresses its genomic RNA in yeast cells controlled by galactose induction. Using spheroplasts made from this yeast, we established a robust polyethylene glycol-mediated yeast: BHK-21 fusion protocol to rescue infectious SINV particles. Our approach is timesaving and utilizes common lab reagents for SINV rescue. It could be a useful tool for the rescue of large single strand RNA viruses, such as SARS-CoV-2.

Subcellular Localization of Signal Peptide Fusion Proteins Expressed in E. coli.

For expression of some proteins in Escherichia coli, export to the periplasmic space is preferred over conventional expression in the cytosol. Export can be accomplished by fusing the coding sequence to DNA encoding a signal peptide (e.g., using pET-22b), which is cleaved by the bacterial signal peptidase as the protein is exported into the space between the inner and outer membranes of E. coli This protocol uses osmotic shock to release polypeptides from the periplasm. Although not quantitative, it should provide preliminary information on the cellular location of signal peptide fusion proteins.

Spheroplasts, poorly known but clinically relevant particles of urinary sediment.

BACKGROUND: In two patients under treatment with various antibiotics, spheroplasts were detected with an automated urine sediment analyzer. METHODS: Urinalysis was performed by an AutionMAX AX 4030-sediMAX platform. RESULTS: Spheroplasts can be easily misclassified as yeasts or erythrocytes, but when automated urine sediment analyzers are used by well-trained, and experienced operators they can be correctly identified and classified. CONCLUSION: Appropriate training of urine laboratory professionals in spheroplast detection and association with UTI, together with timely communication with the microbiologist and caring clinician, will provide prompt targeted treatment.

Peptide Extracts from Native Lactic Acid Bacteria Generate Ghost Cells and Spheroplasts upon Interaction with Salmonella enterica, as Promising Food Antimicrobials.

Protecting foods from contamination applying peptides produced by lactic acid bacteria is a promising strategy to increase the food quality and safety. Interacting with the pathogen membranes might produce visible changes in shape or cell wall damage. Previously, we showed that the peptides produced by Lactobacillus plantarum UTNGt2, Lactobacillus plantarum UTNCys5-4, and Lactococcus lactis subsp. lactis UTNGt28 exhibit a broad spectrum of antibacterial activity against several foodborne pathogens in vitro. In this study, their possible mode of action against the commensal microorganism Salmonella enterica subsp. enterica ATCC51741 was investigated. The target membrane permeability was determined by detection of beta-galactosidase release from ONPG (o-nitro-phenyl-L-D-galactoside) substrate and changes in the whole protein profile indicating that the peptide extracts destroy the membrane integrity and may induce breaks in membrane proteins to some extent. The release of aromatic molecules such as DNA/RNA was detected after the interaction of Salmonella with the peptide extract. Transmission electronic microscopy (TEM) micrographs depicted at least four simultaneous secondary events after the peptide extract treatment underlying their antimicrobial actions, including morphological alterations of the membrane. Spheroplast and filament formation, vacuolation, and DNA relaxation were identified as the principal events from the Gt2 and Cys5-4 peptide extracts, while Gt28 induced the formation of ghost cells by release of cytoplasmic content, filaments, and separation of cell envelope layers. Gel retarding assays indicate that the Gt2 and Gt28 peptide extracts are clearly binding the Salmonella DNA, while Cys5-4 partially interacted with Salmonella genomic DNA. These results increased our knowledge about the inhibitory mechanism employed by several peptide extracts from native lactic acid bacteria against Salmonella. Further, we shall develop peptide-based formulation and evaluate their biocontrol effect in the food chains.

HIV-1 Gag release from yeast reveals ESCRT interaction with the Gag N-terminal protein region.

The HIV-1 protein Gag assembles at the plasma membrane and drives virion budding, assisted by the cellular endosomal complex required for transport (ESCRT) proteins. Two ESCRT proteins, TSG101 and ALIX, bind to the Gag C-terminal p6 peptide. TSG101 binding is important for efficient HIV-1 release, but how ESCRTs contribute to the budding process and how their activity is coordinated with Gag assembly is poorly understood. Yeast, allowing genetic manipulation that is not easily available in human cells, has been used to characterize the cellular ESCRT function. Previous work reported Gag budding from yeast spheroplasts, but Gag release was ESCRT-independent. We developed a yeast model for ESCRT-dependent Gag release. We combined yeast genetics and Gag mutational analysis with Gag-ESCRT binding studies and the characterization of Gag-plasma membrane binding and Gag release. With our system, we identified a previously unknown interaction between ESCRT proteins and the Gag N-terminal protein region. Mutations in the Gag-plasma membrane-binding matrix domain that reduced Gag-ESCRT binding increased Gag-plasma membrane binding and Gag release. ESCRT knockout mutants showed that the release enhancement was an ESCRT-dependent effect. Similarly, matrix mutation enhanced Gag release from human HEK293 cells. Release enhancement partly depended on ALIX binding to p6, although binding site mutation did not impair WT Gag release. Accordingly, the relative affinity for matrix compared with p6 in GST-pulldown experiments was higher for ALIX than for TSG101. We suggest that a transient matrix-ESCRT interaction is replaced when Gag binds to the plasma membrane. This step may activate ESCRT proteins and thereby coordinate ESCRT function with virion assembly.

Factors That Affect the Enlargement of Bacterial Protoplasts and Spheroplasts.

Cell enlargement is essential for the microinjection of various substances into bacterial cells. The cell wall (peptidoglycan) inhibits cell enlargement. Thus, bacterial protoplasts/spheroplasts are used for enlargement because they lack cell wall. Though bacterial species that are capable of gene manipulation are limited, procedure for bacterial cell enlargement does not involve any gene manipulation technique. In order to prevent cell wall resynthesis during enlargement of protoplasts/spheroplasts, incubation media are supplemented with inhibitors of peptidoglycan biosynthesis such as penicillin. Moreover, metal ion composition in the incubation medium affects the properties of the plasma membrane. Therefore, in order to generate enlarged cells that are suitable for microinjection, metal ion composition in the medium should be considered. Experiment of bacterial protoplast or spheroplast enlargement is useful for studies on bacterial plasma membrane biosynthesis. In this paper, we have summarized the factors that influence bacterial cell enlargement.

Analyzing plant mechanosensitive ion channels expressed in giant E. coli spheroplasts by single-channel patch-clamp electrophysiology.

Plants possess numerous ion channels that respond to a range of stimuli, including small molecules, transmembrane voltage, and mechanical force. Many in the latter category, known as mechanosensitive (MS) ion channels, open directly in response to increases in lateral membrane tension. One of the most effective techniques for characterizing ion channel properties is patch-clamp electrophysiology, in which the current through a section of membrane containing ion channels is measured. For MS channels, this technique enables the measurement of key channel properties such as tension sensitivity, conductance, and ion selectivity. These characteristics, along with the phenotypes of genetic mutants, can help reveal the physiological roles of a particular MS channel. In this protocol, we provide detailed instructions on how to study MS ion channels using single-channel patch-clamp electrophysiology in giant E. coli spheroplasts. We first present an optimized method for preparing giant spheroplasts, then describe how to measure MS channel activity using patch-clamp electrophysiology and analyze the resulting data. We also provide recommended equipment lists, setup schematics, and useful conventions.

Small-Scale Preparations of Yeast DNA.

In this protocol, yeast DNA is prepared by digestion of the cell wall and lysis of the resulting spheroplasts with SDS. This method reproducibly yields several micrograms of yeast DNA that can be efficiently cleaved by restriction enzymes and used as a template in polymerase chain reaction (PCR). Note that yeast colonies can also be used directly in PCR, without purifying yeast DNA.

High Throughput Yeast Strain Phenotyping with Droplet-Based RNA Sequencing.

The powerful tools available to edit yeast genomes have made this microbe a valuable platform for engineering. While it is now possible to construct libraries of millions of genetically distinct strains, screening for a desired phenotype remains a significant obstacle. With existing screening techniques, there is a tradeoff between information output and throughput, with high-throughput screening typically being performed on one product of interest. Therefore, we present an approach to accelerate strain screening by adapting single cell RNA sequencing to isogenic picoliter colonies of genetically engineered yeast strains. To address the unique challenges of performing RNA sequencing on yeast cells, we culture isogenic yeast colonies within hydrogels and spheroplast prior to performing RNA sequencing. The RNA sequencing data can be used to infer yeast phenotypes and sort out engineered pathways. The scalability of our method addresses a critical obstruction in microbial engineering.

Synthetic Genomes.

DNA synthesis technology has progressed to the point that it is now practical to synthesize entire genomes. Quite a variety of methods have been developed, first to synthesize single genes but ultimately to massively edit or write from scratch entire genomes. Synthetic genomes can essentially be clones of native sequences, but this approach does not teach us much new biology. The ability to endow genomes with novel properties offers special promise for addressing questions not easily approachable with conventional gene-at-a-time methods. These include questions about evolution and about how genomes are fundamentally wired informationally, metabolically, and genetically. The techniques and technologies relating to how to design, build, and deliver big DNA at the genome scale are reviewed here. A fuller understanding of these principles may someday lead to the ability to truly design genomes from scratch.

A new protocol for single-cell RNA-seq reveals stochastic gene expression during lag phase in budding yeast.

Current methods for single-cell RNA sequencing (scRNA-seq) of yeast cells do not match the throughput and relative simplicity of the state-of-the-art techniques that are available for mammalian cells. In this study, we report how 10x Genomics' droplet-based single-cell RNA sequencing technology can be modified to allow analysis of yeast cells. The protocol, which is based on in-droplet spheroplasting of the cells, yields an order-of-magnitude higher throughput in comparison to existing methods. After extensive validation of the method, we demonstrate its use by studying the dynamics of the response of isogenic yeast populations to a shift in carbon source, revealing the heterogeneity and underlying molecular processes during this shift. The method we describe opens new avenues for studies focusing on yeast cells, as well as other cells with a degradable cell wall.

Estimation of amyloid aggregate sizes with semi-denaturing detergent agarose gel electrophoresis and its limitations.

Semi-denaturing detergent agarose gel electrophoresis (SDD-AGE) was proposed by Vitaly V. Kushnirov in the Michael D. Ter-Avanesyan's laboratory as a method to compare sizes of amyloid aggregates. Currently, this method is widely used for amyloid investigation, but mostly as a qualitative approach. In this work, we assessed the possibilities and limitations of the quantitative analysis of amyloid aggregate size distribution using SDD-AGE results. For this purpose, we used aggregates of two well-characterized yeast amyloid-forming proteins, Sup35 and Rnq1, and developed a protocol to standardize image analysis and process the result. A detailed investigation of factors that may affect the results of SDD-AGE revealed that both the cell lysis method and electrophoresis conditions can substantially affect the estimation of aggregate size. Despite this, quantitative analysis of SDD-AGE results is possible when one needs to estimate and compare the size of aggregates on the same gel, or even in different experiments, if the experimental conditions are tightly controlled and additional standards are used.

Three-Dimensional Visualization of APEX2-Tagged Erg11 in Saccharomyces cerevisiae Using Focused Ion Beam Scanning Electron Microscopy.

The determination of the exact location of a protein in the cell is essential to the understanding of biological processes. Here, we report for the first time the visualization of a protein of interest in Saccharomyces cerevisiae using focused ion beam scanning electron microscopy (FIB-SEM). As a proof of concept, the integral endoplasmic reticulum (ER) membrane protein Erg11 has been C-terminally tagged with APEX2, which is an engineered peroxidase that catalyzes an electron-dense deposition of 3,3'-diaminobenzidine (DAB), as such marking the location of the fused protein of interest in electron microscopic images. As DAB is unable to cross the yeast cell wall to react with APEX2, cell walls have been partly removed by the formation of spheroplasts. This has resulted in a clear electron-dense ER signal for the Erg11 protein using FIB-SEM. With this study, we have validated the use of the APEX2 tag for visualization of yeast proteins in electron microscopy. Furthermore, we have introduced a methodology that enables precise and three-dimensional (3D) localization studies in yeast, with nanometer resolution and without the need for antibody staining. Because of these properties, the described technique can offer valuable information on the molecular functions of studied proteins.IMPORTANCE With this study, we have validated the use of the APEX2 tag to define the localization of proteins in the model yeast S. cerevisiae As such, FIB-SEM can identify the exact 3D location of a protein of interest in the cell with nanometer-scale resolution. Such detailed imaging could provide essential information on the elucidation of various biological processes. APEX2, which adds electron density to a fused protein of interest upon addition of the substrate DAB, originally was used in mammalian studies. With this study, we expand its use to protein localization studies in one of the most important models in molecular biology.

Membrane stiffness is one of the key determinants of E. coli MscS channel mechanosensitivity.

Mechanosensitive (MS) channels have an intimate relationship with membrane lipids that underlie their mechanosensitivity. Membrane lipids may influence channel activity by directly interacting with MS channels or by influencing the global properties of the membrane such as elastic area expansion modulus or bending rigidity. Previous work has implicated membrane stiffness as a potential determinant of the mechanosensitivity of E. coli (Ec)MscS. Here we systematically tested this hypothesis using patch fluorometry of azolectin liposomes doped with lipids of increasing elastic area expansion modulus. Increasing dioleoylphosphatidylethanolamine (DOPE) content of azolectin liposomes made it more difficult to activate EcMscS by membrane tension (i.e. increased gating threshold). This effect was exacerbated by stiffer forms of phosphatidylethanolamine such as the branched chain lipid diphytanoylphosphoethanolamine (DPhPE) or the fully saturated lipid distearoyl-sn-glycero-3-phosphoethanolamine (DSPE). Furthermore, a comparison of the branched chain lipid diphytanoylphosphocholine (DPhPC) to the stiffer DPhPE indicated again that it was harder to activate EcMscS in the presence of the stiffer DPhPE. We show that these effects are not due to changes in membrane bending rigidity as the membrane tension threshold of EcMscS in membranes doped with PC18:1 and PC18:3 remained the same, despite a two-fold difference in their bending rigidity. We also show that after prolonged pressure application sudden removal of force in softer membranes caused a rebound reactivation of EcMscS and we discuss the relevance of this phenomenon to bacterial osmoregulation. Collectively, our data suggests that membrane stiffness (elastic area expansion modulus) is one of the key determinants of the mechanosensitivity of EcMscS.

Characterizing the mechanosensitive response of Paraburkholderia graminis membranes.

Bacterial mechanosensitive channels gate in response to membrane tension, driven by shifts in environmental osmolarity. The mechanosensitive channels of small conductance (MscS) and large conductance (MscL) from Escherichia coli (Ec) gate in response to mechanical force applied to the membrane. Ec-MscS is the foundational member of the MscS superfamily of ion channels, a diverse family with at least fifteen subfamilies identified by homology to the pore lining helix of Ec-MscS, as well as significant diversity on the N- and C-termini. The MscL family of channels are homologous to Ec-MscL. In a rhizosphere associated bacterium, Paraburkholderia graminis C4D1M, mechanosensitive channels are essential for cell survival during changing osmotic environments such as a rainstorm. Utilizing bioinformatics, we predicted six MscS superfamily members and a single MscL homologue. The MscS superfamily members fall into at least three subfamilies: bacterial cyclic nucleotide gated, multi-TM, and extended N-terminus. Osmotic downshock experiments show that wildtype P. graminis cells contain a survival mechanism that prevents cell lysis in response to hypoosmotic shock. To determine if this rescue is due to mechanosensitive channels, we developed a method to create giant spheroplasts of P. graminis to explore the single channel response to applied mechanical tension. Patch clamp electrophysiology on these spheroplasts shows two unique conductances: MscL-like and MscS-like. These conductances are due to likely three unique proteins. This indicates that channels that gate in response to mechanical tension are present in the membrane. Here, we report the first single channel evidence of mechanosensitive ion channels from P. graminis membranes.